Pages

Tuesday, May 15, 2012

Craft Project: Pour Paint Flower Pots

What a fun project this was!! Along with the alcohol ink coasters we made, we created some pour paint pots to also give the girls' teachers. This project was sooo easy! Though it did take a tiny bit of experimenting to get the whole flower pot covered, but if you aren't particular about the outcome, it's so easy!

These two posts inspired us from Dilly-Dali Art and In Lieu of Preschool. Both of their projects turned out amazing! They created larger pots than we did. Ours were just 3" diameter terracotta pots, perfect for a pencil holder (or a very small window sill plant).

Here's what you need:
 I got both the metallic and glitter Creatology Tempera Paint from Michael's. This paint worked AWESOME! I highly recommend it.
I taped the hole in the bottom of the pot. You'll see later in the post, but once you start pouring the paint, it seems as if you'd never be able to get the tape off. The paint is so thick. But once it is dry, the paint really thins out and you can easily remove the tape.
I learned from Genny at In Lieu of Preschool that suspending the pots works well. And boy does it! We used our Colorations BioColor paint bottles to suspend the pots. You'll see in other pictures, I wrapped a paper towel around the bottle before putting the pot on and it worked really well!

I was able to do this project one on one with my girls, which I think was a good thing in hind sight. Both Aleacia from Dilly-Dali Art and Genny advised that less is more when it comes to squeezing the paint. I think if both girls were doing this at the same time, we would have had more paint poured than we needed. :-)
All you have to do is pick your colors and start pouring them one by one into the center of the pot. As the paint covers the bottom of the pot, it will begin to pour over the side in layers.
 
My older daughter (pictured above) didn't want me to help at all so I just let her go and didn't offer any suggestions or anything. My younger daughter was a little more amenable to my suggestions. Instead of just letting the paint fall where it wanted, we let it pool a bit.
Then I picked up the paint bottle it was suspended on and tipped it just a bit to get the paint to cover the bare spots on the pot. We repeated this technique a few times to get most of the pot covered.
 

We went from this:
To this:
I absolutely LOVE LOVE LOVE how they turned out! We will definitely be doing this project again. Quick, easy, and beautiful result!

2 comments: